--- title: "Export Potato Equipment Projects: A Data-First Configuration Method" url: https://www.spudmate.com/de/export-potato-equipment-data-first-configuration/ description: "Goldilocks guide to export potato equipment projects: how Potato cleaning machine BQX-16 / BQX-20 / BQX-24, AI intelligent sorting machine CASL-2X-1800…" published: 2026-10-03 updated: 2026-10-05 author: "xtlaigc" site: "Tianjin Goldilocks Co., Ltd." --- # Export Potato Equipment Projects: A Data-First Configuration Method **In practice:** Goldilocks guide to export potato equipment projects: how Potato cleaning machine BQX-16 / BQX-20 / BQX-24, AI intelligent sorting machine CASL-2X-1800 and Potato stacker crane BDDY-818 fit together, which operating points to set first, and what our engineers confirm before we prepare a line proposal. ## How we configure: export potato equipment projects At Goldilocks, we configure export potato equipment projects around the hand-offs that control product quality and uptime. Potato cleaning machine BQX-16 / BQX-20 / BQX-24, AI intelligent sorting machine CASL-2X-1800 and Potato stacker crane BDDY-818 cover complementary steps; the practical choice is how they share flow, access and operator attention. Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. [![Potato cleaning machine BQX-16 / BQX-20 / BQX-24 from Goldilocks for export potato equipment projects.](/wp-content/themes/goldilocks-industrial/assets/products/cleaner-real.jpg)](https://www.spudmate.com/de/products/potato-cleaning-machine-bqx/) Potato cleaning machine BQX-16 / BQX-20 / BQX-24 [![AI intelligent sorting machine CASL-2X-1800 from Goldilocks for export potato equipment projects.](/wp-content/themes/goldilocks-industrial/assets/products/casl-real.jpg)](https://www.spudmate.com/de/products/ai-intelligent-sorting-machine-casl-2x-1800/) AI intelligent sorting machine CASL-2X-1800 [![Potato stacker crane BDDY-818 from Goldilocks for export potato equipment projects.](/wp-content/themes/goldilocks-industrial/assets/products/bddy-clean.jpg)](https://www.spudmate.com/de/products/potato-stacker-crane-bddy-818/) Potato stacker crane BDDY-818 ## Equipment used in this line These are the models we normally review for this process. Capacity and dimensions set the first layout; our engineers then tune the line to the crop, target flow and site. | Model | Capacity | Dimensions | Role | | --- | --- | --- | --- | | BQX-16 / BQX-20 / BQX-24 | 40 t/h / 60 t/h / >90 t/h | BQX-16: 7000 × 3050 × 2600 mm / 6150 × 3050 × 2450 mm; BQX-20: 7000 × 3200 × 2600 mm; BQX-24: 9000 × 3650 × 3300 mm / 9000 × 3950 × 3300 mm | Bulk potato receiving, soil removal, impurity separation and warehouse intake | | CASL-2X-1800 | 40 t/h | 5000 × 3000 × 1860 mm | Field sorting; inbound and outbound sorting; processing plant sorting | | BDDY-818 | Approximately 80 t/h | Length 17500-22600 mm × width 2500 mm × height 3110 mm | Bulk potato storage, stacking and loading | ## How to plan the line ### 1. Start with the crop and flow Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. ### 2. Set the physical sequence Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. ### 3. Prepare the project brief Before we issue a final proposal, we confirm voltage, material condition, shift pattern, local safety requirements and the acceptance test for the installed line. ## Typical bottlenecks and our method For export projects, equipment configuration and site interfaces should be clearly defined. Project documentation for BQX, CASL and BDDY-818 should include voltage and frequency, equipment dimensions, lifting or shipping points, service access, spare parts information and the site acceptance record. These details support transport, installation and acceptance planning. Most line problems start at a transfer: one machine is rated above the next module, wet produce carries soil into inspection, or a reject stream returns to the main flow. We solve this by sizing the hand-off, buffer and discharge together. Our usual method is a controlled material trial. We set the feed rate, check drop height and belt or roller speed, tune variable-frequency drives where fitted, then record good and reject streams at each step. Depending on the line, the technical review can include buffer volume, belt speed, roller gap, drop height, optical lighting, near-infrared detection, pneumatic reject response and acceptance sampling. - material condition and size range - target flow by hour and by shift - available footprint and service access - power, voltage and discharge direction - the test method used to accept the line ## What we confirm before production A reliable line starts with a clear project brief. We confirm the feedstock, moisture, size range, contamination, installation site and acceptance criteria before fixing the final arrangement or operating target. Goldilocks configures each line after reviewing the crop, target throughput, layout, power and acceptance test. The product links above show the equipment used in this guide; contact us for a project-specific arrangement. [Tell our Goldilocks engineering team about your crop, target flow and site.](https://www.spudmate.com/de/#contact) ## Related technical guides - [How to Size a Potato Cleaning Intake Line](https://www.spudmate.com/how-to-size-potato-cleaning-intake-line/) - [Optical Sorting for Potatoes: Comparing AI and Roller Inspection](https://www.spudmate.com/optical-sorting-potatoes-ai-roller-comparison/) - [Seed Potato Handling: A Practical Equipment Sequence](https://www.spudmate.com/seed-potato-handling-equipment-sequence/)