--- title: "Optical Sorting for Potatoes: Comparing AI and Roller Inspection" url: https://www.spudmate.com/ru/optical-sorting-potatoes-ai-roller-comparison/ description: "Goldilocks guide to optical sorting for potatoes: how AI intelligent sorting machine CASL-2X-1800, Roller-type optical sorting machine CASV-2X-1200 and…" published: 2026-10-03 updated: 2026-10-05 author: "xtlaigc" site: "Tianjin Goldilocks Co., Ltd." --- # Optical Sorting for Potatoes: Comparing AI and Roller Inspection **In practice:** Goldilocks guide to optical sorting for potatoes: how AI intelligent sorting machine CASL-2X-1800, Roller-type optical sorting machine CASV-2X-1200 and Potato mechanical sorting machine BF4-14 fit together, which operating points to set first, and what our engineers confirm before we prepare a line proposal. ## How we configure: optical sorting for potatoes At Goldilocks, we configure optical sorting for potatoes around the hand-offs that control product quality and uptime. AI intelligent sorting machine CASL-2X-1800, Roller-type optical sorting machine CASV-2X-1200 and Potato mechanical sorting machine BF4-14 cover complementary steps; the practical choice is how they share flow, access and operator attention. Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. [![AI intelligent sorting machine CASL-2X-1800 from Goldilocks for optical sorting for potatoes.](/wp-content/themes/goldilocks-industrial/assets/products/casl-real.jpg)](https://www.spudmate.com/ru/products/ai-intelligent-sorting-machine-casl-2x-1800/) AI intelligent sorting machine CASL-2X-1800 [![Roller-type optical sorting machine CASV-2X-1200 from Goldilocks for optical sorting for potatoes.](/wp-content/themes/goldilocks-industrial/assets/products/casv-real.jpg)](https://www.spudmate.com/ru/products/roller-type-optical-sorting-machine-casv-2x-1200/) Roller-type optical sorting machine CASV-2X-1200 [![Potato mechanical sorting machine BF4-14 from Goldilocks for optical sorting for potatoes.](/wp-content/themes/goldilocks-industrial/assets/products/bf4-14-clean.jpg)](https://www.spudmate.com/ru/products/potato-mechanical-sorting-machine-bf4-14/) Potato mechanical sorting machine BF4-14 ## Equipment used in this line These are the models we normally review for this process. Capacity and dimensions set the first layout; our engineers then tune the line to the crop, target flow and site. | Model | Capacity | Dimensions | Role | | --- | --- | --- | --- | | CASL-2X-1800 | 40 t/h | 5000 × 3000 × 1860 mm | Field sorting; inbound and outbound sorting; processing plant sorting | | CASV-2X-1200 | 20 t/h | 4700 × 1700 × 1650 mm | Seed potato sorting; commercial potato selection; onion outbound sorting | | BF4-14 | 60 t/h | 4900 × 4200 × 1900 mm | Four-level potato grading; sorting range 40-150 mm | ## How to plan the line ### 1. Start with the crop and flow Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. ### 2. Set the physical sequence Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. ### 3. Prepare the project brief Before we issue a final proposal, we confirm voltage, material condition, shift pattern, local safety requirements and the acceptance test for the installed line. ## Typical bottlenecks and our method AI vision and roller inspection answer different questions. The CASL reference is useful when the project needs a camera-based quality decision, while CASV and BF4 references describe a more mechanical path for presenting or grading material. A fair comparison should therefore use the same sample, defect definitions, size range and reject handling for each option. Most line problems start at a transfer: one machine is rated above the next module, wet produce carries soil into inspection, or a reject stream returns to the main flow. We solve this by sizing the hand-off, buffer and discharge together. Our usual method is a controlled material trial. We set the feed rate, check drop height and belt or roller speed, tune variable-frequency drives where fitted, then record good and reject streams at each step. Depending on the line, the technical review can include buffer volume, belt speed, roller gap, drop height, optical lighting, near-infrared detection, pneumatic reject response and acceptance sampling. - material condition and size range - target flow by hour and by shift - available footprint and service access - power, voltage and discharge direction - the test method used to accept the line ## What we confirm before production A reliable line starts with a clear project brief. We confirm the feedstock, moisture, size range, contamination, installation site and acceptance criteria before fixing the final arrangement or operating target. Goldilocks configures each line after reviewing the crop, target throughput, layout, power and acceptance test. The product links above show the equipment used in this guide; contact us for a project-specific arrangement. [Tell our Goldilocks engineering team about your crop, target flow and site.](https://www.spudmate.com/ru/#contact) ## Related technical guides - [Root and Stem Products Beyond Potatoes: Adapting Optical Inspection](https://www.spudmate.com/root-stem-products-optical-inspection-beyond-potatoes/) - [Reducing Manual Sorting Work with Staged Potato Inspection](https://www.spudmate.com/reduce-manual-potato-sorting-staged-inspection/) - [Removing Soil and Impurities Before Optical Sorting](https://www.spudmate.com/remove-soil-impurities-before-optical-sorting/)