--- title: "Water-Wash Potato Lines: Planning Cleaning, Lifting and Inspection" url: https://www.spudmate.com/uk/water-wash-potato-line-cleaning-lifting-inspection/ description: "Goldilocks guide to water-wash potato lines: how Potato water-washing sorting solution, Potato cleaning machine BQX-16 / BQX-20 / BQX-24 and Potato roller…" published: 2026-10-03 updated: 2026-10-05 author: "xtlaigc" site: "Tianjin Goldilocks Co., Ltd." --- # Water-Wash Potato Lines: Planning Cleaning, Lifting and Inspection **In practice:** Goldilocks guide to water-wash potato lines: how Potato water-washing sorting solution, Potato cleaning machine BQX-16 / BQX-20 / BQX-24 and Potato roller lifter fit together, which operating points to set first, and what our engineers confirm before we prepare a line proposal. ## How we configure: water-wash potato lines At Goldilocks, we configure water-wash potato lines around the hand-offs that control product quality and uptime. Potato water-washing sorting solution, Potato cleaning machine BQX-16 / BQX-20 / BQX-24 and Potato roller lifter cover complementary steps; the practical choice is how they share flow, access and operator attention. Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. [![Potato water-washing sorting solution from Goldilocks for water-wash potato lines.](/wp-content/themes/goldilocks-industrial/assets/products/water-wash-solution.jpg)](https://www.spudmate.com/uk/products/potato-water-washing-sorting-solution/) Potato water-washing sorting solution [![Potato cleaning machine BQX-16 / BQX-20 / BQX-24 from Goldilocks for water-wash potato lines.](/wp-content/themes/goldilocks-industrial/assets/products/cleaner-real.jpg)](https://www.spudmate.com/uk/products/potato-cleaning-machine-bqx/) Potato cleaning machine BQX-16 / BQX-20 / BQX-24 [![Potato roller lifter from Goldilocks for water-wash potato lines.](/wp-content/themes/goldilocks-industrial/assets/products/roller-lifter.jpg)](https://www.spudmate.com/uk/products/potato-roller-lifter/) Potato roller lifter ## Equipment used in this line These are the models we normally review for this process. Capacity and dimensions set the first layout; our engineers then tune the line to the crop, target flow and site. | Model | Capacity | Dimensions | Role | | --- | --- | --- | --- | | Water-washing sorting solution | Configured to project requirements | Line length approximately 45 m | Outbound washing, sorting, grading and bagging | | BQX-16 / BQX-20 / BQX-24 | 40 t/h / 60 t/h / >90 t/h | BQX-16: 7000 × 3050 × 2600 mm / 6150 × 3050 × 2450 mm; BQX-20: 7000 × 3200 × 2600 mm; BQX-24: 9000 × 3650 × 3300 mm / 9000 × 3950 × 3300 mm | Bulk potato receiving, soil removal, impurity separation and warehouse intake | | Roller lifter | Configured to project requirements | Configured to project requirements | Lifting between selection, sorting and conveying equipment | ## How to plan the line ### 1. Start with the crop and flow Start with crop condition, the hourly target and the quality decision the line must support. We select the first machine around that operating point. ### 2. Set the physical sequence Place receiving, cleaning, inspection, storage and packing in a sequence that leaves room for service access, safe transfer and clear operator sightlines. ### 3. Prepare the project brief Before we issue a final proposal, we confirm voltage, material condition, shift pattern, local safety requirements and the acceptance test for the installed line. ## Typical bottlenecks and our method Water washing changes the project boundary because water, drainage and hygiene become part of the material route. The washing solution, BQX intake cleaning and roller lifter should therefore be checked for elevation, drainage and inspection access as one sequence. The right question is not simply whether washing is possible, but where water is introduced, recovered and kept away from the next quality decision. Most line problems start at a transfer: one machine is rated above the next module, wet produce carries soil into inspection, or a reject stream returns to the main flow. We solve this by sizing the hand-off, buffer and discharge together. Our usual method is a controlled material trial. We set the feed rate, check drop height and belt or roller speed, tune variable-frequency drives where fitted, then record good and reject streams at each step. Depending on the line, the technical review can include buffer volume, belt speed, roller gap, drop height, optical lighting, near-infrared detection, pneumatic reject response and acceptance sampling. - material condition and size range - target flow by hour and by shift - available footprint and service access - power, voltage and discharge direction - the test method used to accept the line ## What we confirm before production A reliable line starts with a clear project brief. We confirm the feedstock, moisture, size range, contamination, installation site and acceptance criteria before fixing the final arrangement or operating target. Goldilocks configures each line after reviewing the crop, target throughput, layout, power and acceptance test. The product links above show the equipment used in this guide; contact us for a project-specific arrangement. [Tell our Goldilocks engineering team about your crop, target flow and site.](https://www.spudmate.com/uk/#contact) ## Related technical guides - [Dry Cleaning Lines for Potatoes: When Modular Layouts Make Sense](https://www.spudmate.com/dry-cleaning-potato-lines-modular-layout/) - [How to Size a Potato Cleaning Intake Line](https://www.spudmate.com/how-to-size-potato-cleaning-intake-line/) - [Optical Sorting for Potatoes: Comparing AI and Roller Inspection](https://www.spudmate.com/optical-sorting-potatoes-ai-roller-comparison/)